- Price Match Guarantee
- No Sales Tax
- FREE Shipping
- Warranty Included
Amerec AK11 AK Series 11KW Steam Shower Generator
by Amerec
$3,335.00
✓ National Amerec Authorized Dealer
✓ FREE Shipping
✓ Low Price Guaranteed + No Sales Tax
✓ Have a question? Call us: (888) 719-5781
Amerec AK11
The Amerec AK11 is an 11kW home steam shower generator engineered for residential and day spa steam baths up to 375 adjusted cubic feet (ACF).
The AK11 steam shower generator includes a durable stainless-steel tank, industrial-grade heating elements, durable electronic components, an electronic water level control system, and a variety of other noteworthy features.
Required control package sold separately.
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire in 1-phase or 3-phase
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
Amerec AK11 AK Series Specifications
Includes:
- 11kW steam bath generator
- Installation and operation manual
- Limited warranty
| Model | AK11 |
|---|---|
| Minimum Adjusted Cubic Feet | 175 |
| Maximum Adjusted Cubic Feet | 375 |
| Kilowatt Rating (KW) | 11KW |
| Shipping Weight (Lbs.) | 35 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 46 Amps |
| Recommended Protective Device | 60 Amps |
| Recommended Minimum Copper Wire Supply | 6 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 10 PSIG |
| Control "Rough In" Cut Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width In Inches | 16-1/2" |
| Depth In Inches | 6-1/4" |
| Height In Inches | 15" |